Download Redmi 10 Prime Firmware File

Download Redmi 10 Prime Firmware (Flash File): Hello friends, today in this article I will tell you about the Xiaomi Firmware Flash official method if you are looking for a complete guide tutorial for this you have come to the right place. Download Firmware For Redmi 10 Prime, USB Drivers, ADB Fastboot tool, Stock ROM, Flash File, Flash Tool, Update file, Custom ROM, Mediatek USB Driver, and ADB USB Driver.

Advantage of Flash Firmware For Redmi 10 Prime

  • Bug Fixes
  • Fixing Software Issues
  • Software Updates
  • Performance Increase

Disclaimer: Androidnifty will not be responsible for any damage or error to your device while/after installing the Firmware files or following this guide. Make sure to take a complete backup of your Redmi 10 Prime before doing anything. Do this at your own risk.

Download Require Files

How to Flash Firmware Using Mi Flash Tool on Redmi 10 Prime

01. Download and Extract the Xiaomi Mi Flash Tool on your computer. After you have finished Extracting the Tool, Those files shall be Visible to you as Follows

02. Now Kindly Open the Setup File to Install the Xiaomi Mi Flash Tool on your Computer.

03. Download the Stock Firmware File (fast boot file) of your Redmi 10 Prime. (Case you have already downloaded the Stock Firmware File then SKIP this Step or Else you can find it at Xiaomi ROM or Firmware Files Androidnifty is also a good source for finding the Stock Firmware).

See also  Download Xiaomi Civi 2 Firmware File

04. Now, you should install the Xiaomi USB Driver on your Computer (also you can download it separately).

05. Switch off your Redmi 10 Prime.

06. Enter Download Mode (Fastboot Mode) on Redmi 10 Prime. To Boot into Download mode: Press and Hold the Power + Volume Down Button for 8-10 Seconds.

07. After that, it Boots up in Download Mode and will Display for Example.

08. While Holding Down both Keys Connected to a PC through a USB Cable.

09. Then Open the Xiaomi Mi Flash Tool from the Start Menu.

10. After launching the Xiaomi Mi Flash Tool a Window Appears like this one.

11. Now Tap on the Select Button and locate the Firmware File Folder.

12. Finally, Click the Flash Button to Start the Flashing Process.

13. When Done with the Flashing Process. After this, you will see the message of Success.

Conclusion

There are many ways to Install the Xiaomi Firmware on a Redmi 10 Prime, but the easiest way is to use a Computer. Many processes can be used but they are a bit difficult and none work that much better overall this is the easiest way to Install the Xiaomi Firmware Redmi 10 Prime.

Thank you for visiting androidnifty.com. We look forward to mentioning the desired outcome or engagement and being a valuable resource for you.

Leave a Comment